One Machine, Every Job — The Laser Welder That Handles 0.5mm to 6mm Without Switching Equipment
0.5mm stainless in the morning, 6mm carbon steel in the afternoon — same operator, same machine, no equipment changeover. The KH-2000 handles the output of 2–3 TIG stations on thin and medium-gauge work. Factory-direct from $3,800 FOB. OEM branding available.
🏭 Factory-Direct Manufacturer
🏷️ OEM/ODM Available
🔧 Covers 90% of Job Shop Needs
⭐ Industrial-Grade Laser Source
Built for Shops That Weld Everything
At 2000w handheld laser welder, you get full penetration on 6mm carbon steel in a single pass. At the same time,
pulse modulation lets you dial down for 0.5mm stainless without burn-through. Same operator.
Same machine. Same day.
If your shop takes whatever comes through the door — stainless kitchen equipment on Monday,
structural steel on Wednesday, aluminum repair on Friday — you need one machine that handles it
all. The KH-2000 is our most popular model because it sits exactly where most fabrication shops live.
One KH-2000 handles the work that used to tie up 2–3 TIG stations on thin and medium-gauge jobs.
Your experienced welders focus on complex fit-ups and thick structural work — the laser takes
the repetitive high-volume seams off their plate. Most shops recover the full machine cost in
3–6 months from the capacity gained, not from cutting staff.
What the KH-2000 Can Do — and Why It Matters for Your Shop
| Specification | KH-2000 | Why It Matters for Your Shop |
|---|---|---|
| Max Laser Output | 2000W | Full penetration on 6mm CS — single pass |
| Laser Source | MAX / Raycus (Genuine) | >90% power retention at 3 years |
| Weld Capacity (CS | Up to 6mm | Structural fabrication — beam, channel, plate |
| Weld Capacity (SS) | Up to 5mm | Commercial kitchen, railing, process piping |
| Weld Capacity (Aluminum) | Up to 3mm | Profiles, enclosures, marine components |
| Voltage | 110V/220V Single Phase | Rent a unit, start welding — no electrical upgrade |
| Current Draw | 10.8A (50Hz) / 10.0A (60Hz) | Standard 20A breaker is sufficient |
| Control System | 7" Touch, 16 Languages | Custom recipe saving, one-tap batch recall |
| Duty Cycle | 80–85% sustained | 6-hour production runs without cooldown |
Three Functions, Zero Downtime Between Jobs
In a job shop, the clock is the boss. Every minute switching between machines is unbillable.
The KH-2000’s 3-in-1 eliminates that gap:
Primary mode. 2000 watts creates a stable melt pool on 4–5mm material — smooth, spatter-free
seams, zero post-processing for most jobs.
Built for the Reality of Job Shop Work
Custom Recipe Storage — Zero Setup Between Batch Changes
Welding 2mm stainless countertops today and 5mm carbon racking tomorrow? Save both profiles.
One tap to recall. No re-tuning. For shops doing repeat orders, this alone saves 15–20 minutes
of adjustment per shift.
Uprated Cooling — Sustained Production Runs
Sustained Production Runs The KH-2000 chiller maintains stable laser temperature at 80-85% duty cycle — critical when you’re running 6-hour shifts on medium-gauge material. Uses R-32 eco-friendly refrigerant, CE-certified and compliant with EU F-Gas regulations. The 1500W cools adequately at 60-70%; the 2000W is built for real production.
OEM Made Simple
Your logo on the machine. Your brand on the manual. Your colors on the control panel. We handle
everything — MOQ starts at 5 units.
Job Shop ROI
A typical shop with 2 welders spending 70% of their time on thin-gauge repetitive work:
• Before: those 2 welders produce 40 hours of thin-gauge output + grinding per week
• With KH-2000: 1 laser produces the same output in ~8 hours — the 2 welders now spend
their entire week on higher-margin complex work that used to get pushed to overtime
• Net effect: capacity nearly doubles without adding a single person. Machine cost recovered
in under 2 months from additional throughput.
*Based on typical job shop data. Your results depend on specific application and labor rates.*
Is the KH-2000 Right for Your Shop?
Laser vs TIG vs MIG — An Honest Comparison
| Factor | KH-2000 Laser | Traditional TIG | Traditional MIG |
|---|---|---|---|
| Speed (4mm CS, 1m seam) | ~50 seconds | ~5 minutes | ~2 minutes |
| Post-weld cleanup | None | Heavy grinding | Moderate grinding |
| Thin plate <1mm | Excellent, zero warping | Good, risk of burn-through | Poor, frequent burn-through |
| Thick plate 6mm | Single pass | Multiple passes required | Single pass, messy |
| Skill needed | 30 min for experienced welders | Years to master the trade | 1–2 weeks for basic operation |
| Grinding required | None for most seams | Heavy — 2–3× weld time | Moderate — spatter cleanup |
| Spatter & fumes | Minimal | Minimal | Heavy |
The honest take:
Keep your MIG for thick structural. Use the laser for thin-to-medium stainless and aluminum — the higher-margin work. Most shops find the laser takes over 70% of daily jobs within the first month.
Questions Job Shop Owners Ask
MIG does thick structural well, but it spatters, needs grinding, and can’t touch thin stainless
without burning through. The laser excels at thin-to-medium stainless and aluminum — exactly the
higher-margin work. Keep the MIG for heavy structural. The laser handles everything else.
Most shops find the laser takes over 70% of daily work within a month.
The 2000W has uprated cooling for sustained longer runs, custom recipe storage (not just presets),
and aluminum capacity to 3mm vs. 2mm on the 1500W. If you occasionally weld 3–6mm steel or need
production-level duty cycles, the $1,100 difference (approximate FOB) pays for itself in versatility.
Yes. Full OEM service: logo, color scheme, branded packaging and documentation. Minimum order
starts at 5 units. We provide white-label marketing materials — product photos, spec sheets, and
video assets ready for your catalog.
FOB from our factory. We recommend trusted freight forwarders for sea/air freight to your country.
Transit: 15–25 days to US West Coast, 25–35 days to Europe, 10–15 days to Southeast Asia.
All export documents included.
Laser source, control system, chiller, and welding head covered against
manufacturing defects. Remote diagnosis via video call — replacements ship within 48 hours.
Consumables excluded.
Send us your materials. We’ll weld them on video — free. If you prefer, visit our factory and
run the machine yourself. Either way, you verify performance before paying.
Two Ways to Get Started
Get Factory-Direct Pricing
Send Us a Sample for Free Test Weld